Archive for the ‘Tennessee’ Category

Ohio House Advances Nuclear Subsidy Bill that Would Eliminate the State’s Renewable Portfolio Standard (RPS)

Posted May 31st, 2019 by SRECTrade.
The Davis-Basse Nuclear Power Station will be subsidized under Ohio House Bill 6. Source: News-Herald

On Wednesday, May 29th, the Ohio House of Representatives passed House Bill 6 (HB 6) 53-43 that would repeal the state’s renewable energy mandate and replace it with a nuclear subsidy program under the moniker “Clean Air Program”. This nuclear subsidy program would help bailout two ailing nuclear power plants in Ohio owned by bankrupt utility FirstEnergy Solutions by adding a $1 surcharge on customers’ monthly utility bills. The program would also extend a surcharge of $2.50 per month through 2030 to support ailing coal plants across the state.

The bill would eliminate the renewable portfolio standard (RPS) in Ohio, a key component to maintaining the financial viability of renewables compared with other fossil-fuel based electricity generation resources. As such, nearly all renewable assets generating OH-certified renewable energy credit (REC) or solar renewable energy credit (SREC) products would cease to generate these credits as of the effective date of the bill. Additionally, the bill would do away with the nearly $200 million program to fund energy efficiency and demand response initiatives, which saved Ohio customers over $5 billion from 2009 to 2017, according to the Midwest Energy Efficiency Alliance.

The bill now moves on to the Ohio Senate. While state senators have not publicly voiced their support of the bill, outspoken support from Governor Mike DeWine and the Republican majority in the senate gives the bill momentum to pass.

SRECTrade strongly urges constituents and market stakeholders to reach out to members of the Ohio State Senate and voice their concern with this Bill. The Senate directory can be found here. SRECTrade will continue monitoring these policy proceedings closely and provide updates.

DC Closes Borders to Out-of-State Solar Systems

Posted July 12th, 2011 by SRECTrade.

The Council of the District of Columbia unanimously voted, today July 12th, to close the DC SREC market to out-of-state systems. The Distributed Generation Amendment Act of 2011 (Bill 19-10) increases the SREC requirement in 2011 as well as establishes an SACP schedule through 2023.  Once in effect, the bill will allow out-of-state systems registered prior to 1/31/2011 to continue to sell SRECs in the DC market. The DC Public Services Commission has not provided clarification on how the bill will affect out of state systems that have already granted DC registrations after the January 31st 2011 grandfather date. For more information on the bill please refer to our previous blog postings here and here.

The bill is not yet law. It first must go through a 30-day Congressional Review process before it can go in to effect. Given these mechanistic delays we don’t expect the bill to go in to effect for at least another month.

The following chart illustrates which out-of-state systems will be effected by the legislation.

State Eligible Markets (after B19-10 is effective)
DE DE, PA
IN OH; PA (if in American Electric Power territory)
IL PA (if in Com Ed territory)
KY OH; PA (if in American Electric Power territory)
MD MD; PA
MI OH; PA (if in American Electric Power territory)
NC NC; PA (if in Dominion Electric Territory)
NJ NJ, PA
NY
OH OH; PA
PA PA; OH
TN PA (if in American Electric Power territory)
VA PA
WV OH; PA
WI

Additional Info for DC SREC registrations

Posted May 10th, 2010 by SRECTrade.

DC Eligibility
For customers looking to register systems in the DC SREC market, as we have previously stated, DC will accept applications from customers sited in the PJM regions and states adjacent to the PJM region where electricity is eligible to be transmitted into the PJM region. SRECTRADE will manage the application process for our EasyREC customers to ensure the system is approved.

DC Facility Rejections
We previously reported that a facility was rejected out of New York state and have learned that the application provided that the electricity was not capable of being transmitted into the PJM region. The DC PSC was subsequently unable to get clarification in order to approve the facility.

A second facility in New York has also been rejected because there was “no basis to conclude that the facility generates electricity consumed within the PJM Interconnection region.”  We are currently seeking clarity on how these determinations are made and will post them when we have more information.  In the meantime, here are some details:

DC rule 945-E-1764 (http://www.dcpsc.org/pdf_files/commorders/dcmr15/Chapter29.pdf) defines a renewable energy credit as “a credit representing one megawatt hour of electricity consumed within the PJM interconnection region that is derived from a tier 1 renewable source, a tier 2 renewable source, or a solar source that is located:

“In the PJM Interconnection region or in a state that is adjacent to the PJM Interconnection region.”

The same document describes New York as an “Adjacent PJM State” and the New York Independent System Operator (NYISO) as an “Adjacent Control Area”.  The crux of the issue seems to be the wording “consumed within the PJM interconnection region”.  Electricity flows bidirectionally between PJM and NYISO every day, the amount varying based on supply and demand in the two ISOs.  An electron generated in NYISO clearly can’t be tracked (Heisenberg and all), so there is no way to know if a given electron generated by the grid-tied solar installation makes its way into PJM and is consumed. In fact there is no way to know if a given electron generated by any installation in any “Adjacent PJM State” makes its way to PJM and is consumed there, although it is possible that any electron generated in an adjacent PJM state will. Going even further, an electron generated by a system located in DC might actually be consumed outside PJM! As we see it, this leaves two choices on how to interpret the DC RPS rules. Either every grid tied generator in an “Adjacent PJM State” could be delivering their electrons to be consumed in PJM and therefore all are eligible to create DC renewable energy credits, or none can prove that their specific electrons where consumed in PJM and so none are eligible.

How far back will DC accept SREC generation?
We also get questions about systems that were installed prior to the application date in DC. Customers and installers will ask how far back DC will count solar generation for SRECs. DC will only count SRECs created in the current energy year (same as calendar year) as long as generation is inputted before the last business day in January. This means that, as of this blog post, any generation for a facility in 2009 will not count. Only generation from January 2010 onwards will be eligible for the creation of SRECs.

Subscribe to the SREC Blog by Email


PJM Region

Posted March 28th, 2010 by SRECTrade.

The PJM Interconnection is a regional transmission organization.  It serves to connect the electricity produced by the various utilities across a region.  In several states, the Renewable Portfolio Standard legislation lets utilities count renewable electricity produced within the PJM region towards meeting the state’s renewable goals.

In Pennsylvania, for example, a resident within the PJM region can apply for certification in the Pennsylvania SREC program.  If your system is convered in this map, you can sell SRECs to PA!

Washington, DC is similar to Pennsylvania in that both allow SRECs from anywhere within the PJM region, however DC will also qualify facilities that are eligible to deliver their electricity into the region. This may include facilities in states that are adjacent to the PJM region such as New York or Wisconsin.

Ohio is another state that allows SRECs from out of state. In that specific case, the utilities are limited to buying 50% from out of state and only from states within the region that are contiguous: Pennsylvania, West Virginia, Kentucky, Michigan and Indiana.

Washington, DC is similar to Pennsylvania in that both allow SRECs from anywhere within the PJM region, however DC will also qualify facilities that are eligible to deliver their electricity into the region.

For these reasons, it is important to know what constitutes the PJM region to determine whether or not you qualify.  Here is a map of the region, along with the retail electricity companies who are served by PJM.

pjm-region


New York Facility Rejected by the DC SREC Program

Posted February 24th, 2010 by SRECTrade.

We recently received additional clarification on the rules governing acceptance into the District of Columbia SREC Program. Previously we noted that DC will approve facilities in states adjacent to the PJM region. However, the actual requirements are more specific than that. A facility sited in a state adjacent to the PJM Region must also demonstrate that the electricity produced by the facility can be served into the PJM Region. This will likely be an important distinction for residents of New York, Michigan, Wisconsin, Illinois, Indiana, Kentucky and Tennessee who are hoping to register and sell SRECs in DC.

We are working with the DC Public Service Commission to get clarity on how to determine whether facilities sited in states adjacent to the PJM Region are indeed eligible for the DC SREC program and will provide an update as soon as possible.

DC State Eligibility Criteria

Posted January 25th, 2010 by SRECTrade.

The District of Columbia is one of the states that will allow its electricity suppliers to procure SRECs from out-of-state solar generating facilities. There are no defined boundaries for what states may qualify for certification in the DC SREC market. According to information received by SRECTrade, the DC PSC will approve SRECs for states in the PJM region and states adjacent per the following guidelines:

The DC Public Service Commission is responsible for approving applications to the DC SREC market.  Their rule of thumb is that if your state has an RPS similar to DC you are guaranteed certification in DC. Currently those states include Maryland, Pennsylvania, Delaware, New Jersey and Ohio.

Solar facilities built in all other PJM area states AND adjacent states are reviewed closely and the DC PSC will determine if they can be granted certification. Currently, they have not declined a registration from any of those states because of location. Based on the map of the PJM region, these states include: Indiana, Illinois, Kentucky, Michigan, Tennessee, Virginia, West Virginia and Wisconsin.

Here is a link to get you started:

DC Certification Instructions